SAE J311-2000 Fluid for Passenger Car Type Automatic Transmissions

1. Scope-This SAE Information Report details some of the equipment and procedures used to measure critical characteristics of automatic transmission fluid(ATF) used in current automatic transmissions. It is intended to assist those concerned with the design of transmission components, and with the selection and marketing of automatic transmission fluids for the use in passenger car and light-duty truck automatic transmissions. The information contained herein will be helpful in understanding the terms related to properties, designations, and service applications of automatic transmission fluids.

2. References
2.1 Applicable Publications-The following publications form a part of the specification to the extent specified herein. Unless otherwise indicated the lastest revision of SAE publications shall apply.
2.1.1 SAE PUBLICATION-Available from SAE,400 Commonwealth Drive, Warrendale, PA 15096-0001.
SAE J110-Seals-Testing of Radial Lip
2.1.2 ASTM PUBLICATIONS-Available from ASTM,100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.
ASTM D130-Method of Test of Copper Strip Corrosion by Petroleum Products
ASTM D665-Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water
ASTM D892-Foaming Characteristics of Lubricating Oils
ASTM D1275-Method of Test for Corrosive Sulfur in Electrical Insulating Oils
ASTM D1748-Method of Test for Rust Protection by Metal Preservatives in the Humidity Cabinet
ASTM D2882-Indicating the Wear Characteristics of Petroleum and Non-Petroleum Hydraulic Fluids in a Constant Volume Vane Pump
2.1.3 GM PUBLICATIONSAvailable from General Motors Corporation, GM ATF Commiee,30500 Mound Road, M/C 480-106-160, Warren, Ml48090.
GM-6137M-DEXRON®-lIE Automatic Transmission Fluid Specification, General Motors Corporation, August 1992
GM-6417M-DEXRON®-ll Automatic Transmission Fluid Specification, General Motors Corporation, December 1998

加载中请耐心等待。双击可全屏预览。发现文档有侵权/水印/二维码/链接等请举报。

没有回复限制吧

好帖留名

可以啊

挺好的，多谢