SAE J300-1999 Engine Oil Viscosity Classification

 

微信注册 一步即可

您需要 登录 才可以下载或查看,没有账号?立即注册

x
SAE J300-1999 Engine Oil Viscosity Classification

1. Scope-This SAE Standard defines the limits for a classification of engine lubricating oils in rheological terms only. Other oil characteristics are not considered or included.

2. References
2.1 Applicable Publications-The following publications form a part of this specification to the extent specified herein. Unless otherwise specified, the latest issue of SAE publications shall apply.
2.1.1 SAE PUBLICATIONS-Available from SAE,400 Commonwealth Drive, Warrendale, PA 15096-0001.
SAE J510-Lubricants for Two-Stroke-Cycle Engines
SAE J1536-Two-Stroke-Cycle Engine Oil Miscibility/Fluidity Classification
2.1.2 ASTM PUBLICATIONS-Available from ASTM,100 Bar Harbor Drive, West Conshohocken, PA 19428-2959.
ASTM D97-Standard Test Method for Pour Point of Petroleum Oils
ASTM D 445-Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids(and the Calculation of Dynamic Viscosity)
ASTM D2500-Standard Test Method for Cloud Point of Petroleum Oils
ASTM D3244Standard Practice for Utilization of Test Data to Determine Conformance with Specifications
ASTM D3829Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil
ASTM D4683-Standard Test Method for Measuring Viscosity at High Temperature and High-Shear Rate by Tapered Bearing Simulator
ASTM D4684Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
ASTM D4741Standard Test Method for Measuring Viscosity at High Temperature and High-Shear Rate by Tapered-Plug Viscometer
ASTM D5133Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
ASTM D5293Standard Test Method for Apparent Viscosity of Engine Oils Between-30 and-5C Using the Cold-Cranking Simulator
ASTM D5481Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer


1. 为确保文库内容质量,请发现文档内容存在错误、广告链接、二维码、页面质量差等,请立即举报。
2. 汽车文库注册用户分享内容设置了需支付下载的,所有权益归内容发布者所有。
3. 汽车文库所有文档来源于注册用户分享,如有侵权请邮件联系qichewenku@yeah.net

回答|共 4 个

linuvzg

linuvzg 发表于 2022-11-3 11:20:14 | 显示全部楼层

感谢分享

地下三千米

地下三千米 发表于 2022-12-8 23:37:40 | 显示全部楼层

免费啊,替你宣传了

hamlight

hamlight 发表于 2023-9-24 12:09:05 | 显示全部楼层

打开速度太慢

王安

王安 发表于 2024-3-21 17:16:38 | 显示全部楼层

有汽车工程师吗?
汽车文库是汽车行业文档聚合平台,文档内容聚焦产品开发和行业报告。
平台面向汽车工程师提供众包服务,注册会员可按要求上传文档并获得收益。
赶快加入VIP会员可享受更多权益吧。
联系我们 加入会员