微信注册 一步即可
您需要 登录 才可以下载或查看，没有账号？立即注册 
x
SAE J304-1999 Engine Oil Tests
1. Scope— The purpose of this SAE Information Report is to describe test conditions and performance evaluation factors for both diesel and gasoline engine tests. Specifically, the tests described in this document are used to measure the engine performance requirements for engine oils described by the APl Service Categories described in API Publication 1509, ASTM D 4485, SAE J183 and SAE J1423 standards,U.S.military specifications, and ILSAC GF Standards.
2. References
2.1 Applicable Publications-The following publications form a part of the specification to the extent specified herein. Unless otherwise indicated the latest revision of SAE publications shall apply.
2.1.1 SAE PUBLICATIONS-Available from SAE,400 Commonwealth Drive, Warrendale, PA 15096-0001.
2.1.1.1 SAEJ183-Engine Oil Performance and Engine Service Classification (other than "Energy Conserving")
2.1.1.2 SAEJ1423-Passenger Car and Light Duty Truck Energy-Conserving Engine Oil Classification
2.1.2 ASTM PUBLICATIONS-Available from ASTM,100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.
2.1.2.1 ASTM D4485-Standard Specification for Performance of Engine Oils
2.1.2.2 ASTM Special Technical Publication 315l, Part I-Multicylinder Test Sequences for Evaluating Automotive Engine Oils
2.1.2.3 Research reports containing the Cummins M-11, Mack T-6,T-7, and T9, and Caterpillar 1K,1M-PC,1N, and 1P and the Navistar HEUI procedures are available from ASTM. None of these procedures has been published as an ASTM Standard Test Method.
2.1.2.4 ASTM D 5290-Standard Test Method for Measurement of Oil Consumption, Piston Deposits, and Wear in a Heavy-Duty High-Speed Diesel Engine-NTC-400 Procedure
2.1.2.5 ASTM D 5119-Standard Test Method for Evaluation of Automotive Engine Oils in the CRC L-38 Spark-Ignition Engine
加载中请耐心等待。双击可全屏预览。发现文档有侵权/水印/二维码/链接等请举报。
| 
junjun 