微信注册 一步即可
您需要 登录 才可以下载或查看，没有账号？立即注册 
x
SAE J310-2000 Automotive Lubricating Greases
1. Scope-This SAE Recommended Practice was developed by SAE, and the section "Standard Classification and Specification for Service Greases"cooperatively with ASTM, and NLGl. It is intended to assist those concermed with the design of automotive components, and with the selection and marketing of greases for the lubrication of certain of those components on passenger cars, trucks, and buses. The information contained herein will be helpful in understanding the terms related to properties, designations, and service applications of automotive greases.
2. References
2.1 Applicable Publications-The following publications form a part of this specification to the extent specified herein. Unless otherwise specified, the latest issue of SAE publications shall apply.
2.1.1 SAE PUBLICATIONS-Available from SAE,400 Commonwealth Drive, Warrendale, PA 15096-0001.
SAE AMS 3217A-Standard Elastomer Stock-Test Slabs
SAE AMS 3217/2A-Test Slabs, Acrylonitrile Butadiene(NBR-L)-Low Acrylonitrile,65-75
SAE AMS 3217/3B-Test Slabs, Chloroprene(CR)-67-75
2.1.2 ASTM PUBLICATIONS-Available from ASTM,100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.
ASTM D128-Analysis of Lubricating Grease
ASTM D217-Cone Penetration of Lubricating Grease
ASTM D566-Dropping Point of Lubricating Grease
ASTM D942-Oxidation Stability of Lubricating Greases by the Oxygen Bomb Method
ASTM D972-Evaporation Loss of Lubricating Greases and Oils
ASTM D1092-Apparent Viscosity of Lubricating Greases
ASTM D1263-Leakage Tendencies of Automotive Wheel Bearing Greases
ASTM D1264-Water Washout Characteristics of Lubricating Greases
ASTM D1403-Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment
ASTM D1404-Test Method for Estimation of Deleterious Particles In Lubricating Grease
ASTM D1478-Low-Temperature Torque of Ball Bearing Greases
ASTM D1742-Oil Separation from Lubricating Grease During Storage
ASTM D1743-Corrosion Preventive Properties of Lubricating Greases
ASTM D1831-Roll Stability of Lubricating Grease
ASTM D2265-Dropping Point of Lubricating Grease Over Wide-Temperature Range
加载中请耐心等待。双击可全屏预览。发现文档有侵权/水印/二维码/链接等请举报。
| 
omufiusufowek 