微信注册 一步即可
您需要 登录 才可以下载或查看，没有账号？立即注册 
x
SAE J272-1981 VEHICLE IDENTIFICATION NUMBER SYSTEMS
Foreword--This Document has not changed other than to put it into the new SAE Technical Standards Board Format.
1. Scope
1.1 This recommended practice describes general characteristics of VIN systems. It includes certain specific requirements, supporting definitions, basic content, and examples.
1.2 The VIN should be considered in the context of a world manufacturer identifier to establish a unique vehicle identity.
1.3 Supplemental reports to this recommended practice establish specific VIN requirements for different types of motor vehicles.
1.4 Purpose-This SAE Recommended Practice provides direction for uniform content and structure of vehicle identification numbers assigned to each type of motor vehicle.
2. References
2.1 Applicable Publications-The following publications form a part of the specification to the extent specified herein. Unless otherwise indicated, the latest issue of SAE Publications shall apply.
2.1.1 SAE PUBLICATIONS-Available from SAE,400 Commonwealth Drive, Warrendale, PA 15096-0001.
SAE J853a-Vehicle Identification Numbers
SAE J1044a-World Manufacturer Identifier
3. Definitions
3.1 Vehicle Identification Numbers(VIN)-The number assigned to a vehicle by the manufacturer primarily for registration and identification purposes. It may consist of numerals, letters, or a combination thereof (see SAE J853a.)
3.2 World Manufacturer Identifier(WMI)-The first section of the VIN consisting of a code designating the manufacturer of the vehicle(see SAE J1044a).
加载中请耐心等待。双击可全屏预览。发现文档有侵权/水印/二维码/链接等请举报。
| 
pt13488724369 